Published cabinet refinishing and painting costs for Riverside
The Riverside figures come from two city cost pages, one for refinishing and one for painting. The national figures come from Thumbtack’s own job data. Read together, they give a fair range for a Riverside kitchen and a way to tell when a quote is out of line.
| Figure | Published amount | Where it comes from |
|---|---|---|
| Refinishing, Riverside typical range | $975 to $5,425 | Riverside refinishing cost page |
| Refinishing, Riverside rate | $4 to $10 a square foot | Riverside refinishing cost page |
| Painting, Riverside typical range | $1,004 to $5,587 | Riverside painting cost page |
| Painting, Riverside average job | around $1,000 | Riverside painting cost page |
| Refinishing, national average range | $307 to $1,359 | Thumbtack |
| Refinishing, national typical job | $619 | Thumbtack |
| Refinishing, national low and high | $112 and $4,334 | Thumbtack |
| Painting kitchen cabinets, national average range | $1,390 to $3,353 | Thumbtack |
| Painting kitchen cabinets, national typical job | $2,164 | Thumbtack |
| Painting, small to medium kitchen, Southern California painter | about $900 | Gardena, CA painter quoted by Thumbtack |
| Painting labour | $45 to $55 per hour | Thumbtack |
Read at the source pages in October 2026. Reference figures for orientation, not a quote from this business.
The Riverside ranges sit above the national refinishing figures, and the sources count different jobs: the national refinishing data covers bathroom cabinets as well as kitchens, which pulls its average down, while the Riverside pages are written around the kitchen. The Southern California painter’s figure of about $900 for a small to medium kitchen lines up with the Riverside painting average of around $1,000.
Sources: Riverside refinishing cost page→ · Riverside painting cost page→ · Thumbtack refinishing costs→ · Thumbtack cabinet painting costs→
Three units, one kitchen: how refinishing quotes are priced
Refinishers quote in different units, and a quote in one cannot be compared with a quote in another until both are converted. The three you will see:
| Unit | Published rate | Worked example |
|---|---|---|
| Per square foot of surface | $4 to $10 a square foot | 100 sq ft of doors, fronts and frames: $400 to $1,000 |
| Per linear foot of cabinetry | $38 per linear foot | 30 linear feet: $1,140, the source's own example |
| Per hour of labour | $45 to $55 per hour | Materials and prep billed on top |
Rates from the Riverside refinishing cost page and Thumbtack. The square foot example is simple arithmetic on the published rate for an illustrative area, not a measured kitchen.
Linear feet is the easiest to check yourself: run a tape along the base cabinets and the wall cabinets separately and add them. A square foot quote depends on what is counted, doors only or doors, fronts and frames, so ask before comparing. An hourly quote is only comparable once it carries an estimate of hours. The per linear foot guide shows how to measure a run in ten minutes.

Cabinet refinishing cost by situation
| Situation | Effect on the price | Why |
|---|---|---|
| One bathroom vanity | Lowest | Few doors, and often done with the kitchen as a colour test |
| Kitchen painted one colour over a sound finish | Lower half of the Riverside range | Degrease, degloss, prime and two topcoats, no stripping |
| Two colour kitchen, uppers and lowers different | Higher | Two colour runs, more masking, more spray room time |
| Oak doors painted smooth | Higher | The open grain is filled before priming |
| Stain going lighter | Highest refinish | Every door stripped to bare wood first |
| Repairs found when the doors come off | Added line by line | Hinge holes, drawer joints, slides, a swollen sink base |
| Home built before 1978 | Added | Certified firm and lead safe containment, cleaning and verification |
| New handles or pulls | $3 to $15 each, plus fitting | Holes may need filling where the new spacing differs |
Lead safe practice is the line most often missing from cheap quotes in this city. With 56.5 percent of Riverside homes built in 1979 or earlier, a refinish that sands or deglosses old paint is covered work under the federal rule in most houses here, and the minor repair exemption stops at six square feet or less of paint per room. A quote that does not mention it is either for a newer house or has left it out. Source: EPA renovation, repair and painting program→
Refinishing against refacing and replacement, in Riverside dollars
The same Riverside cost site prices all three options, so the comparison runs on one set of numbers. Refinishing at $975 to $5,425 keeps everything and changes the finish. Laminate refacing at $1,439 to $2,266 for a twelve cabinet kitchen, or wood veneer at $2,000 to $6,000, keeps the boxes and replaces every visible face. Custom replacement at $15,000 to $20,000 replaces the lot.
Cost is only half the decision. Refinishing cannot change the door style, so if the style is the complaint, the cheaper job will not fix it. The cabinet refinishing page covers which doors can take paint or stain, and the cabinet refacing page covers new doors on the boxes you have.

